Bulletproof vest police Belgium Molle HO2-KR1-SP1 + NIJ-4 ICW Sioen blue

Bulletproof vest FED police Belgium Molle HO2-KR1-SP1 Sioen dark blue + 2 hard ballistic plates NIJ 4 ICW for sale. New bullet-proof and stab-resistant vest CAST 2017 with Molle webbing. Easy to attach accessories, Molle bags, webcam, patch. Made according to the standard of the Federal Police against 7. 62x25mm Tokarev and stab resistant against knives and awls and against war rifles.

.

This bulletproof and stab-resistant vest British CAST 2017 H02 - KR1-SP1 intended for local police Belgium with Molle webbing was developed by Sioen Ballistics according to the specifications of the Belgian Police GPI95 and is intended for the Federal Contract from 2022 in the dark blue color (almost black).

.

The outer cover is available separately and is made of strong, wear-resistant Cordura® with a “Heat and Sweat” system on the inside for maximum wearing comfort and optimization of body temperature.

.

Easily adjustable thanks to elastic pattes with Velcro (on the shoulders, stomach and back) and a breathable belly band to improve ergonomics.

.

Closing with a zipper in the middle for easy putting on and taking off, with the zipper loose at the bottom to make it easier to close the zipper.

.

2 large pockets next to the central closure with elastic compartment and space to route the cables of electrical devices from left to right.

.

Possibility to place hard plates in the vest on top of the flexible protection. At the back a traditional plate pocket. In front of a special bag where the plate can be easily placed or removed in a car.

.

Different zones with Velcro to attach all kinds of logos and equipment.

Thanks to a Molle system with Velcro and a fastening system for G-hooks, the vest can be equipped with all kinds of Molle bags to store equipment, such as handcuff bag, bodycam,.

.

The large surface of the Lasercut webbing makes it easy to attach accessories such as a bodycam at the right height.

.

In the adjustment elastics towards the back there is a possibility to store a first aid kit and other equipment such as needle-resistant gloves or other protection.

.

Possibility to attach a crotch protection. This meets the demand for better protection of the lower abdomen against both bullets and stabbings

.

Vest is delivered without logos. Logos and patches for the Belgian Police can only be ordered by police forces with an order form, they will be removed for private use or for security officers.

.

Protection value: CAST2017-HO2-KR1-SP1 Sioen + 2x NIJ-4 ICW

Small arms

This officially tested body armor meets the HO2 requirements of the English CAST2017 standard. This provides the necessary protection against bullet impacts of the projectiles 9x19mm FMJ DM11A1B2 and 9mm JHP P9HST1 at 430 +/-10m/sec with a trauma smaller than 20mm. This body armor also offers protection against impacts from projectiles 9mm HS at (350+/-15)m/sec, 9mm TFMJ at (390+/-15)m/sec, 9mm PEP 2. 0 on (420+/-15), 9mm Action 6 SXF on (415+/-15)m/sec and 7. 62x25 Tokarev FMJ at (440+/-15)m/sec with all trauma smaller than 20mm and also . 357Magnum SPFN at 455 +/-10m/sec with all traumas less than 25mm.

.

Knife

The panels have been officially tested against stabbing and meet the KR1 requirements of the same standard. It was tested 38 times with the P1/B blade with an energy of 24 joules (maximum penetration of 8mm) and 9 times with the P/1B blade with an energy of 36 joules (maximum penetration of 20mm allowed). In both cases there were no penetrations through the solution.

.

Prime

The solution meets the SP1 requirements of the same standard, it was tested 23 times with the SP awl with an energy of 24 joules, with no penetration through the protection panels.

Also meets the requirements of the KR2 level according to the old HOSDB 2007 standard

.

Hard ballistic plate SAT- NIJ4-Conj.

The NIJ-4 Conj. Plate must therefore always be worn above a soft bulletproof vest HO2-KR1-SP1 to achieve the protection value NIJ-4.

.

Operation: The steel core bullet hits the bulletproof plate, the bullet deforms and breaks into small pieces and loses a lot of its energy. This deformed clog with small pieces passes through the plate, where the residual energy of the deformed Kogel clog is then absorbed by the Ho2-KR1-SP1 bulletproof package that is carried underneath.

Stops steel core bullets or AP ammunition!

Double curved. Follows the shape of the chest well.

Standard dimensions: 250x300 mm.

Weight: 2. 9 kg.

Stops:

7. 62x63mm AP (30-06)

7. 62x51mm AP (FAL)

7. 62x39mm AP (AK-47)

5. 56x45mm AP (M16)

Sizes from XS to 3XL

Specially made to measure price +100%

.

Only available to an address in Belgium, the Netherlands and Luxembourg.

Please contact us first for urgent availability.

Link to contact page

Phone Mobile: +32 495 77 32 77

WhatsApp: +32 495 77 32 77

Messenger : Supply Store FSDIP